View UPC2749TB-E3-A_1331959.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

3 V, SUPER MINIMOLD UPC2749TB 1900 MHz SI RFIC AMPLIFIER
FEATURES
* HIGH DENSITY SURFACE MOUNTING: 6 pin super minimold or SOT-363 package * GAIN: 16 dB TYP * NOISE FIGURE: 4.0 dB TYP
Gain, GP (dB)
20 TA = -40C TA = +25C 15 25 VCC = 3.0 V
GAIN vs. FREQUENCY AND TEMPERATURE
* SUPPLY VOLTAGE: VCC = 2.7 to 3.3 V
10 TA = +85C
DESCRIPTION
NEC's UPC2749TB is a Silicon RF Integrated Circuit which is manufactured using the NESAT III process. This device is suitable as a buffer amplifier for GPS, PCS and other communication receivers. The UPC2749TB is pin compatible and has comparable performance as the larger UPC2749T, so it is suitable for use as a replacement to help reduce system size. The IC is housed in a 6 pin super minimold or SOT-363 package. NEC's stringent quality assurance and test procedures assure the highest reliability and performance.
5
0 0.1 0.3 1.0 3.0
Frequency, f (GHz)
ELECTRICAL CHARACTERISTICS (TA = 25C, ZL = ZS = 50 , VCC = 3.0 V)
PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GS fU1 P1dB PSAT NF RLIN RLOUT ISOL OIP3 RTH (J-A) PARAMETERS AND CONDITIONS Circuit Current (no signal) Small Signal Gain, f = 900 MHz f = 1900 MHz UNITS mA dB dB GHz dBm dBm dB dB dB dB dB dBm C/W 7 9.5 25 -9 MIN 4 13 2.5 UPC2749TB SO6 TYP 6 14.5 16 2.9 -12.5 -6 3.2 4.0 10 12.5 30 -3.5 325 5.5 MAX 8 18.5
Upper Limit Operating Frequency 1 dB Compressed Output Power at 1900 MHz Saturated Output Power, Noise Figure, Input Return Loss, Output Return Loss, Isolation, f = 1900 MHz f = 900 MHz f = 1900 MHz f = 1900 MHz f = 1900 MHz f = 1900 MHz
SSB Output Third Order Intercept, f1 = 1900 MHz, f2 = 1902 MHz Thermal Resistance (Junction to Ambient) Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB
Note: 1.The gain at fU is 3 dB down from the gain at 1900 MHz.
California Eastern Laboratories
UPC2749TB ABSOLUTE MAXIMUM RATINGS1 (TA = 25C)
SYMBOLS VCC ICC PIN PT TOP TSTG PARAMETERS Supply Voltage Total Supply Current Input Power Total Power Dissipation2 Operating Temperature Storage Temperature UNITS V mA dBm mW C C RATINGS 4.0 15 0 200 -40 to +85 -55 to +150
RECOMMENDED OPERATING CONDITIONS
SYMBOLS VCC TOP PARAMETERS Supply Voltage Operating Temperature UNITS MIN V C 2.7 -40 TYP MAX 3 25 3.3 85
TEST CIRCUIT
VCC 1000 pF
Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB (TA = 85C).
C3 6 50 IN 1000 pF C1 1 2, 3, 5 4 1000 pF C2 50 OUT
TYPICAL PERFORMANCE CURVES (TA = 25C)
ISOLATION vs. FREQUENCY
0
0
INPUT RETURN LOSS AND OUTPUT RETURN LOSS vs. FREQUENCY
Input Return Loss, RLIN (dB) Output Return Loss, RLOUT (dB)
VCC = 3.0 V -10
VCC = 3.0 V RLOUT -10
Isolation, ISOL (dB)
-20
-20
-30
RLIN -30
-40
-50 0.1 0.3 1.0 3.0
-40 0.1 0.3 1.0 3.0
Frequency, f (GHz)
Frequency, f (GHz)
OUTPUT POWER vs. INPUT POWER AND VOLTAGE
0 f = 1.9 GHz VCC = 3.3 V VCC = 3.0 V
0
OUTPUT POWER vs. INPUT POWER AND TEMPERATURE
VCC = 3.0 V f = 1.9 GHz
TA = +85C
Output Power, POUT (dBm)
Output Power, POUT (dBm)
-5
-5
TA = -40C
-10 VCC = 2.7 V -15
-10
TA = -40C TA = +25C
-15
TA = +25C
-20
-20
TA = +85C
-25
-25
-30 -40
-35
-30
-25
-20
-15
-10
-5
0
-30 -40
-35
-30
-25
-20
-15
-10
-5
0
Input Power, PIN (dBm)
Input Power, PIN (dBm)
UPC2749TB TYPICAL PERFORMANCE CURVES (TA = 25C)
SATURATED OUTPUT POWER vs. FREQUENCY AND VOLTAGE THIRD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE AND VOLTAGE
Third Order Intermodulation Distortion, IM3 (dBc)
Saturated Output Power, POUT(SAT) (dBm)
0 VCC = 3.3 V -5 VCC = 3.0 V PIN = -6 dBm
0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 -30 -28 -26 -24 VCC = 2.7 V
f1 = 1.900 GHz f2 = 1.902 GHz
-10 VCC = 2.7 V -15
VCC = 3.3 V VCC = 3.0 V
-20
-25 0.1 0.3 1.0 3.0
-22 -20 -18 -16
-14 -12
-10
Frequency, f (GHz)
Output Power of Each Tone, POUT(each) (dBm)
CURRENT vs. VOLTAGE
10 No Signal
CURRENT vs. TEMPERATURE
10 No Signal VCC = 3.0 V
6
Circuit Current, Icc (mA)
0 1 2 3 4
8
8
Current, ICC (mA)
6
4
4
2
2
0
0 -60
-40
-20
0
+20
+40
+60
+80 +100
Voltage, VCC (V)
Temperature, TA (C)
GAIN vs. FREQUENCY AND VOLTAGE
25
NOISE FIGURE vs. FREQUENCY AND VOLTAGE
6 VCC = 2.7 V
VCC = 3.3 V VCC = 3.0 V
Noise Figure, NF (dB)
20
5 VCC = 3.0 V 4
Gain, GP (dB)
15
10
VCC = 2.7 V
3
VCC = 3.3 V
5
2
0 0.1
1
0.3 1.0 3.0
0.1
0.3
1.0
3.0
Frequency, f (GHz)
Frequency, f (GHz)
UPC2749TB PIN DESCRIPTION
Pin No. Pin Name Applied Voltage (V) - Pin Voltage (V) 0.82 Description Internal Equivalent Circuit
1
Input
Signal input pin. An internal matching circuit, configured with resistors, enables 50 connection over a wide bandwidth. A multi-feedback circuit is designed to cancel the deviations of hFE and resistance. This pin must be coupled to the signal source with a blocking capacitor. Signal output pin. An internal matching circuit, configured with resistors, enables 50 connection over a wide bandwidth. This pin must be coupled to the output load with a blocking capacitor. Power supply pin. This pin should be externally equipped with a bypass capacitor to minimize ground impedance. Ground pins. These pins should be connected to system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible. All the ground pins must be connected together with wide ground pattern to minimize impedance difference.
VCC 6
4
Output
-
2.87
OUT 4 1 IN
6
VCC
2.7 to 3.3
-
3 GND
2 GND
5
2 3 5
GND
0
-
SYSTEM APPLICATION EXAMPLE Example of GPS Receiver
Pre Amp. Unit
RF Amp. BPF LNA UPC2749TB UPC2749TB BPF
Mixer
IF Amp. IF Filter
PLL
VCO Loop Filter
UPC2749TB TYPICAL SCATTERING PARAMETERS (TA = 25C)
1.0 GHz
2.0 GHz
1.0 GHz
3.0 GHz 0.1 GHz
0.1 GHz 3.0 GHz 2.0 GHz
S11
S22
VCC = 3.0 V, ICC = 6.5 mA
FREQUENCY GHz 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 MAG 0.021 0.038 0.034 0.052 0.062 0.079 0.097 0.116 0.134 0.156 0.178 0.195 0.214 0.229 0.249 0.259 0.264 0.259 0.248 0.238 0.218 0.204 0.183 0.156 0.140 0.119 0.095 0.078 0.066 0.070 0.082 S11 ANG 13.0 -30.5 -71.8 -120.5 -149.9 -169.7 173.6 160.5 149.3 138.8 128.5 118.7 108.7 99.5 89.4 79.9 69.8 60.3 50.9 43.6 35.9 30.1 25.3 21.2 18.8 18.7 21.2 30.0 44.5 66.0 78.1 MAG 4.096 4.216 4.282 4.403 4.390 4.399 4.566 4.667 4.843 5.016 5.305 5.660 5.835 6.148 6.364 6.611 6.577 6.549 6.407 6.321 6.046 5.862 5.696 5.430 5.282 5.013 4.849 4.596 4.446 4.163 3.966 S21 ANG -1.9 -7.8 -15.5 -21.0 -26.6 -31.6 -36.7 -41.3 -46.8 -52.6 -60.3 -67.1 -76.2 -84.5 -93.8 -103.6 -113.5 -123.4 -132.9 -140.8 -148.8 -156.5 -163.2 -170.5 -176.3 177.2 170.9 164.9 158.1 152.3 145.3 MAG 0.002 0.001 0.001 0.002 0.002 0.003 0.005 0.007 0.008 0.009 0.014 0.016 0.020 0.022 0.025 0.028 0.032 0.034 0.036 0.037 0.038 0.039 0.040 0.041 0.042 0.040 0.042 0.042 0.042 0.044 0.042 S12 ANG -1.1 75.4 141.5 129.9 134.1 128.3 132.9 131.5 129.3 124.6 131.4 122.5 118.6 114.4 107.7 104.3 96.8 91.8 83.3 78.5 75.1 70.4 68.3 60.7 61.6 58.1 55.1 51.9 44.7 41.9 37.1 MAG 0.024 0.033 0.064 0.080 0.103 0.127 0.151 0.174 0.197 0.220 0.240 0.262 0.279 0.287 0.294 0.294 0.283 0.272 0.036 0.234 0.213 0.193 0.174 0.164 0.152 0.142 0.146 0.149 0.154 0.171 0.181 S22 ANG 165.8 113.6 96.1 87.9 76.9 68.6 60.6 53.7 44.9 36.1 28.0 17.3 8.6 -2.0 -13.5 -23.6 -33.8 -44.1 -53.8 -61.4 -69.5 -73.8 -79.5 -84.1 -82.1 -84.5 -85.5 -83.9 -91.8 -92.8 -99.6 66.82 129.26 90.16 45.30 57.58 34.08 22.08 14.70 12.29 10.00 6.15 5.13 3.80 3.23 2.72 2.35 2.09 1.99 1.97 1.99 2.04 2.08 2.15 2.25 2.25 2.53 2.46 2.62 2.70 2.73 2.97 K
UPC2749TB OUTLINE DIMENSIONS (Units in mm)
PACKAGE OUTLINE S06
2.10.1 1.250.1
3 4 4 3
LEAD CONNECTIONS
(Top View) (Bottom View)
2.00.2 0.65 3 1.3 0.65 2
4
0.2 +0.1 -0
2
C1U
5
5
2
5
1
6
6
1
1
6
DOT ON BACK SIDE
0.9 0.1 0.7
0 ~0.1
+0.1 0.15 -0.5
1. 2.. 3. 4. 5. 6.
INPUT GND GND OUTPUT GND VCC
ORDERING INFORMATION
PART NUMBER UPC2749TB-E3-A MARKING CIU QTY 3K/Reel
Note: Embossed Tape, 8 mm wide. Pins 1, 2 and 3 face perforated side of tape.
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
EXCLUSIVE NORTH AMERICAN AGENT FOR
RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393 * FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) * Internet: http://WWW.CEL.COM 9/21/2000 DATA SUBJECT TO CHANGE WITHOUT NOTICE
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of UPC2749TB-E3-A

	To Download UPC2749TB-E3-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .